Description

Compatibility This phone cradle fits the center console of the latest series Opel Corsa and Vauxhall Corsa, built from 2019 to present ( Series F ). This includes petrol, diesel and electric models in all trim variants. Features Wireless Qi Phone Charger Wireless AndroidAuto / CarPlay Dongle Charging Status LED shining through divider bar   Build & Assembly Instructions   Purchased Materials: Count Material ~ Heat-Resistant Filaments (*) Ideally, one translucent filament in an accent color of your choice, and one carbon-fiber infused filament for added stiffness. ~ CA-Glue / Super-Glue 6x M3x10 socket-head bolts (Amazon) 1x 20W Qi Charger Module (Amazon) 1x AAWireless Two (AAWireless) (**) 2x 0.5m 90° USB-C Cables (Amazon) 1x USB Power Supply for 12V DC Socket (Amazon) (optional) 1x 1 mm thick Anti-slip Silicone Sheet (Amazon) Alternatively, Faux Leather or Neoprene Sheets Requires precise cutting, ideally with a cutting plotter or laser cutter. Alternatively, the pad can be 3D printed. (optional) 1x Double-sided mounting tape, 1mm thick (Amazon) Not strictly necessary, but can reduce rattling of the components in the housing. *   No PLA! - summer heat melts PLA prints in the car. Use PETG, PC-PETG, ASA, ABS, etc. Potentially, use carbon-fiber infused filaments for better stiffness and heat resistance. **  At the time of this writing, the ‘AAWireless TWO’  does not support Apple CarPlay. The ‘AAWireless TWO Plus’ is slated to be released in 2025 with Apple CarPlay support.   3D-Printed Parts: I recommend printing with a 0.6mm nozzle . When printing with a 0.4mm nozzle, increase the number of perimeters and infill density. Part Notes Base Settings: 0.2 mm Layer Height 3 Perimeters 15% Grid Infill Avoid Crossing Perimeters Ideally use carbon-fiber infused filament. Potentially, use a 10mm Brim to avoid lifting off the corners. Lid Settings: 0.2 mm Layer height 3 Perimeters 25% Grid Infill Print up-side-down. Carbon fiber may interfere wit