Description

OpenSourceEV Parts designs, produces, and shares 3D‑printed parts for Rivian EVs. Staying true to our open‑source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for little to no cost. We’re here to empower the Rivian owner community by making DIY customization simple, affordable, and accessible — backed by over 5,000 downloads on our Printables page and our new low‑cost, free‑shipping Creator Kits available on our website. And if you’re considering a Rivian R1S or R1T, you can receive up to $500 in Rivian Gear while supporting our mission of open‑source enhancements by using our Rivian Referral Rewards code: ROBERT1265188 . You enter this code when putting your deposit down on your Rivian. Details are available here . +++ OVERVIEW This item is a remix of our Ultimate MagSafe Charging Kit for the Gen 1 Rivian R1S and R1T, located here: https://www.printables.com/model/381218-opensourceev-ultimate-magsafe-charging-pad-v2-for This updated design is essentially four parts: An upper shelf A lower clamsell A holder for the 12V to USB-A QC 3.0 Buck Converter A TPU liner (optional, but highly recommended. In addition, you'll need the following parts: 2 x LISEN Cooling + Charging MagSafe Pads -- https://www.amazon.com/dp/B0CLRPMXPD 2 x USB-A to USB-C 1ft cables (order one) - https://www.amazon.com/dp/B092ZS6SJG 1 x USB-A QC 3.0 Buck Converter -- https://www.amazon.com/dp/B07SS6XTZY 1 x Molex Connector -- https://opensourceev.com/products/power-kit-molex-connector Tape (automotive grade recommended) -- https://www.amazon.com/dp/B0821GSP4H ASSEMBLY Assembly is pretty straight forward as it only goes together one way. Note the location used for tape and how the 1ft USB cables are routed. The hardest part will absolutely be soldering the Molex connector onto the barrel plug / cable. BLACK goes to the OUTSIDE and RED goes to the INSIDE. It very much needs to be insulated via shrink wrap or similar as it will pull over 3