Description

Replacements for the thin rubber strips originally glued to the underside of the battery hold down bars on the 3rd Gen Toyota Hilux-Surf along with 4runners & Tacomas of similar vintage. May also fit earlier/similar models but you would have to confirm this yourself.   I previously tried gluing on rubber stips to replace the original perished items but the strips always seemed to end up sliding out, perhaps I was not using the best glue, but eventually settled on these instead. These are thicker that the original rubbers and as they also cover both faces of the clamps (originals are underside only, not faces) it results in a more secure /snug fit for the batteries. I have had these on one of my batteries for about 18 months (Surf with dual battery config) and they work well with no sign of degradation so far and now added to the remaining battery. I printed in TPU using 2 bottom layers, 3 top layers, 2 walls, 20% infill with 0.4mm nozzle, 0.28mm layer height. Print in orientation supplied, no support required.