Description

I have designed holders for storage box for electric hyundai kona. Holders are installed instead of existing motor cover using original cover rubber foots. Holders lengths is over 220 mm which is standard 3D printing bed size so I include splited stl version (called splited_left/right) which can be printed on printers with bed size 220 mm. However these must be then screwed together (left and right part) by using M4x10 mm screw and nut (not longer as screw can not protrude the holder). If your printer bed size is enough you can print holder as one piece, then use stl version called "holder_long". So wie so, you need to use supports to print it. I recommend to print out of PETG as in motor space can be quite warm during the summer. I have used threated isnerts to fix the box on, but you can use standard screw with nut as well, depends what you have at home.