Description

WARNING : Strictly follow safety instructions provided with your jack when using it Description Winter arriving, I had to install the winter wheels of my vehicle. But the Stanley jack I've got was delivered with a flat pad that didn't fit my new Hyundai Kona EV Inspired by the model https://makerworld.com/en/models/1411236-jack-pad-protect-your-car-s-jack-points#profileId-1465030 I designed my owned adapted to the lift point profile of my Kona EV. Note that It should fit to other car models. Just check size profile with bellow drawing. Printing instructions I printed it with 98A TPU with adapted number of perimeters and infill type and density, so the pad is not too crushed when lifting the car. You can use harder TPU, but I don't recommend using softer one. I did a test with 95A, and it was definitively too flexible. Supports are needed but easy to remove in my case. One can use different filament material for support interface for easier removal. On top of .stl and .3mf files, I uploaded fusion .f3d and .step files, so you can modify the design and adapt it to your needs. As usual, feedback and comments (and for sure "likes") will be always welcome. Feel free to post nice pictures of your makes. Enjoy If you like this model, take a look also at my other designs in Printables.