Description

This model is a custom-designed wrench specifically made to easily open and tighten the oil filler cap on S2000 (AP1/AP2) vehicles without scratching it. It allows you to apply extra leverage to effortlessly unscrew oil caps that have become stuck or too tight to open by hand due to engine heat cycles. It fits perfectly over the cap, ensuring no damage to your aluminum or plastic filler cap. Print Recommendations: Material: PETG, ABS, or ASA (Recommended over PLA for better mechanical stress resistance). Layer Height: 0.20 mm Infill: 50 % – 100 % (High infill is strictly required so the wrench can handle torque without breaking). Wall Lines (Perimeters): At least 4 or 5. Copyright & Usage Notice All models are designed and created by me. Files are provided strictly for personal use only. Any commercial sale, redistribution, or modification is prohibited. For commercial use, please contact me directly. Important Notice This wrench is specific to the vehicle. Please ensure you have the standard OEM shaped oil cap before downloading. To prevent the tool from snapping under torque, you must print it with the recommended high infill and thick walls.