Description

Without purchasing the expensive kit from Rivian, the only way to keep a spare tire in position within the spare tire compartment is to cobble together some plumbing supplies or print a part like this.   While this part has been designed with the 2022-2024 R1T 21" road wheels in mind, I imagine it will work fine with the other wheel types. Also required to make this work: 10mm x 30mm fender washer 10mm-1.50 x 100mm metric full thread bolt, item number 88506 (or compatible) When inserting the bolt, you may have to tap it into the hole using a hammer as it was designed to be tight.  Please note, I didn't design this to clamp down super tight onto the wheel since there may be variance among wheel sizes and types so there may be some slight play once bolted into place. Recommended printing settings used on a Bambu X1C: PETG-HF or TPU Top shell layers - 8 Bottom shell layers - 8 Sparse infill density - 60% Sparse infill pattern - Gyroid