Description

🎁   Get $100(s) in Rivian Rewards points and 3 months free RAN charging by using my  referral code   TODD11893313  when  🛒 ordering a Rivian . UPDATES Dec 15, 2024 Revised clip feet design to support new “lock” mechanism.  The lock snaps in from below. The lock is NOT compatible with the old feet.  You'll need to print new accessories with the updated feet to be able to use the lock. The new feet have a tighter fit.  They're a bit harder to attach, but hold better even without the lock. See Rivian Forums post for testing video. Rounded the point on the inside of the chevron to be less pointy.  Because of the chamfer, the first layer would print with a sharp angle.  This was causing a “sharp” edge on the surface layers.  Now it should feel less sharp. This only affects the surface feel.  It does not affect the function of the clips.  See Rivian Forums post for more details. Overview 💬 Discuss this model on Rivian Forums I liked the look of the OEM Rivian console organizer, but it was out of stock before I could order one.  I then took to modeling up a replica in the meantime to print myself.  As I started modeling, I noticed some things about the OEM one that I thought could be improved. I wanted the bottom to have holes to allow light to show what's below. I wanted it to be easily removable It slides out without tipping – which the OEM one does as well I added a notch to help grab it from the back I wanted it to be compatible with the safety manual (or any other docs using the built-in strap). I keep my California State Parks pass behind the safety manual and wanted that easily accessible. The top compartment can slide forward and tuck under where the led light is.  The OEM one sits much higher. Standard credit card size items should fit in the top compartment with a divider. To keep the top compartment from sliding around, holes for magnets are included. The magnets should just