Description

English This set replaces the original clips for the floor mats if they have come loose from the vehicle carpet. Unfortunately, Renault does not offer a suitable solution in this case. Please note the licence conditions for the set below. The set consists of an upper part, a lower part and an optional installation tool. Printing instructions: To withstand the mechanical stress of snapping into place and daily use, I recommend the following settings: Material: PETG (necessary for temperature resistance in the car and break resistance under mechanical stress) Nozzle: 0,4 mm Layer height: 0.15 mm Specific settings: renault zoe floor mats button repair top part clip.3mf: 100% filling | Supports: everywhere renault zoe floor mats button repair bottom part.3mf: 100% filling renault zoe floor mats button repair assembly tool.3mf: 30% filling | 4 wall thicknesses Installation instructions: Preparation: Slide the bottom part with the smooth surface (print bed side) facing upwards into the hole in the carpet. Position it so that it is centred in the hole in the carpet. Attachment: Place the top part with the ribbed cylinder facing downwards into the hole in the bottom part. Assembly: Press the upper part down quickly and firmly. Tools: If your fingers are not strong enough, use the printed assembly tool. Place it on the small button on the top. If necessary, you can tap the tool lightly with a hammer to ensure that the clip locks securely into place. Support / Coffee fund Developing and testing such replacement parts requires time and filament for prototypes. If this repair has helped you and you would like to support my work, I would be very grateful for a small donation! paypal.me/PatUnderlineS Thank you very much for your appreciation! Copyright & Terms of Use These files are provided under strict copyright. By downloading them, you agree to the following terms and conditions: No redistribution: The files may not be uploaded to other platforms or shared with third parties