Description

A compartment to raise the walls of the door compartment of the Renault 5 e-tech. Because a vehicle heats up a lot in the sun, I recommend using ASA or at least PETG for this model! Compartments for the left and right door are different. I added STL for both sides. In the 3mf file I used the mirror function in the slicer. Since I like to have a rounded edge, there's also a radius on the outside, just above the back plate. My X1 Carbon prints this very well with ASA. The rough spots can be easily smoothed with a sharp metal edge or sandpaper.Since I like to have a rounded edge, there's also a radius on the outside, just above the back plate. My X1 Carbon prints this very well with ASA. The rough spots can be easily smoothed with a sharp metal edge or sandpaper. 0.2mm layer height 6 walls no support needed