Description

Cover the area where the distributor used to go, using this part. There are 2 version uploaded: One is designed for using thread inserts with. One is designed for using M6 heat-sert / knurled nut inserts (as seen in pictures). The OD of the insert is 8mm (nominal) in my file. In either case, you'll need M6 x 10mm cap screws to fasten it to the cam tower front housing. Would recommend using Nylon or Polycarbonate for this due to the temperatures. My pictures show carbon fiber PC which printed quite nicely. Use at least 4 perimeters - mainly so the threads (or heat-serts) have a good amount of material to work with. I did the pictured part with 4 perimeters at 0.5mm line width and it is fine.