Description

🎁   Get $100(s) in Rivian Rewards points and 3 months free RAN charging by using my  referral code   TODD11893313  when  🛒 ordering a Rivian . UPDATES 2025-10-24 Added the -v2 version as an alternate style with rounded edges.  The arms of my glasses would hang up a bit on the edges as I slid them on and was hoping that having rounded edges would help. 2025-05-22 Shortened the internal hook a few mm.  Discovered it was hitting the plastic housing preventing the clip from fully seating.  It's a subtle change but the fit should be slightly better now. Overhead Sunglasses Holder I struggled to cleanly mount the original design in my Gen1 R1S.  It wouldn't fully seat and caused the overhead light unit to look overly stressed (bent) once it got clipped back into place.  This was as far as I could insert the original clip: I also noticed that because of the different thicknesses of the model, it printed it using many separate lines rather than nice continuous streams.  I wonder if this could lead to weaknesses, so I decided to just clean up the model slightly so it was one consistent thickness.  In doing so, I also reworked a few other details while I was playing with it: I adjusted the clip portion that holds it onto the headliner.  I wanted to keep it from trying to go between the headliner and the overhead light mounting plate.   I made the thickness consistent, so each layer would lay down a nice clean fluid line instead of lots of separate lines.  This shows my clip on the right and the original on the left. Finally, I removed the extra hook preventing the sunglasses from being slid out.  I felt it was unnecessary and made it hard to remove the sunglasses.  Instead, the design was modified so that the front portion that rests along the headliner is smooth and curved. This keeps the handle-like front of the original, but also lets you slide the sunglasses back out one-handed. In