Description

Repair or retrofit the parking sensor installation on your Opel Combo D / Fiat Doblo with this practical 3D-printable parking sensor holder and bumper mounting kit. This model was designed around the parking sensor with reference OEM 1368915080 and has been successfully fitted to an Opel Combo 2014 with an approximately 30 mm bumper opening. OEM 1368915080 is confirmed as a 3-pin ultrasonic parking sensor used on the Fiat Doblo platform; parts catalogues group the Doblo 2009+ and Opel Combo D together for this application. Instead of replacing a complete bumper assembly or trying to improvise a sensor mount, print this purpose-designed holder and restore a secure sensor installation. 🚘 COMPATIBILITY Designed and tested for: Opel Combo D — 2012–2018 Opel Combo 2014 — tested fit Fiat Doblo II / Doblo 2009+ — OEM sensor application The Combo D shares its platform with the Fiat Doblo, and aftermarket technical catalogues specifically list parking sensor 1368915080 for the Doblo 09+ / Combo D family. ⚠️ Bumper opening: approximately 30 mm Always measure your bumper opening and compare the sensor before printing, because bumper versions and factory equipment may differ. 🔢 OEM / REFERENCE NUMBERS Primary sensor reference: 1368915080 Additional cross-reference numbers associated with this parking sensor include: 1606904180 1347236080 735411204 6590.Q7 Catalogues confirm 1368915080 as an ultrasonic parking sensor and cross-reference it with several PSA/Fiat-family numbers. ⚠️ These numbers identify/cross-reference the parking sensor, not the 3D-printed holder itself. 📦 MODEL CONTENTS The assembly consists of several printable components designed to work together. Part 1 – Sensor Cover The sensor cover is designed with a 2° tilt. This helps reproduce the required sensor orientation when installed in the bumper. Part 2 – Main Holder This component forms the main mounting structure. Supports are required when printing this part. Flexible Ring / Gasket The small ring should p