Description

Restore the original appearance of your Opel Antara wheels with this 3D-printable wheel center cap / alloy rim hub cap. This model recreates the classic Opel lightning-bolt emblem and is designed as a replacement for a missing, cracked, faded or damaged wheel center cap. The cap uses an integrated rear retaining system, allowing it to snap into the wheel center opening without additional visible hardware. 📐 DIMENSIONS Model dimensions: Outer diameter: 60 mm Mounting diameter: 56 mm Additional reference diameter: 58 mm D60 × 56 × 58 mm ⚠️ Wheel center caps can vary even on the same vehicle depending on the wheel design. Measure your original cap and wheel opening before printing. 🚘 COMPATIBILITY Designed for: Opel Antara — 2006–2017 Vauxhall Antara — 2006–2015 Potential compatibility depends primarily on the wheel and center bore dimensions, rather than only the vehicle model. This model may therefore also be useful for other Opel wheels using the same approximately 60 mm outer / 56 mm mounting dimensions, but fitment should be verified before printing. 🔢 OEM / PART NUMBER NOTE Opel used several center-cap versions on Antara wheels depending on wheel style and production period. Because the supplied model is dimensioned specifically at 60 × 56 × 58 mm, I would not assign an OEM number without confirming the exact original wheel design. This avoids buyers assuming compatibility solely from an OEM number when their Antara has different factory or aftermarket wheels. ⭐ FEATURES ✔ Designed for Opel Antara ✔ 60 mm outer diameter ✔ Integrated Opel-style emblem ✔ Rear snap-in retaining tabs ✔ Replacement for lost or damaged center caps ✔ Easy to print ✔ Can be painted for an OEM-style finish ✔ Individual caps can be printed instead of purchasing a complete set ✔ Scalable for custom applications 🖨️ RECOMMENDED PRINT SETTINGS Material: ASA / ABS / PETG Layer height: 0.10–0.16 mm Walls: 4–5 Infill: 50–80% Scale: 100% For the retaining clips, use enough perimeters to keep t