Description

Magnetic Stabilizer for Seat Belt | Stabilizzatore magnetico per cintura di sicurezza For the print, you will need to include a pause in the slicer to insert the magnet. Steps to Add a Pause in Bambu Studio: Prepare Your 3D Model: Design the model with a cavity or slot where the magnet will fit. Ensure the dimensions match the magnet size for a snug fit. Load the Model into Bambu Studio: Open Bambu Studio and import your model as usual. Set Up the Pause for Magnet Insertion: Identify the layer at which you want to pause the print (this is typically the layer just before the printer starts covering the cavity for the magnet). In Bambu Studio: Go to the "Preview" mode after slicing the model. Scroll through the layers to find the precise point where the pause should occur. Add a Pause Print Command by using the "Insert Pause" option available in the software. Test the Pause: Verify that the pause happens at the right layer in the slicing preview. During the print, the printer will pause and move the print head away, allowing you to insert the magnet safely. Resume Printing: After inserting the magnet, resume the print directly from the printer interface. Tips for Success: Magnet Size: Double-check the size and thickness of the magnet to ensure it fits perfectly without disrupting the layer above. Secure the Magnet: To prevent the magnet from shifting, consider adding a drop of glue if needed, but ensure it won’t affect the print. Test Print: Run a small test print with a similar design to confirm the pause and insertion process before starting the full print. Let me know if you'd like further assistance or need help designing the model!