Description

The Lexus IS-F Airbox Clip is prone to breaking. This model reinforces the tab with a 3D printed brace, and optionally you can replace your clip if you've lost it. The Brace installs over your existing clip with no modifications required to your airbox (i.e. no drilling, and double-sided tape is optional but recommended). If you don't have access to a printer or are not sure exactly which version you need and would still like this printed, don't hesitate to message me (with close up photos of both tabs), I should be able to help. It can be used regardless if you have a broken tab, or even if you don't (as a preventative measure to ultimately having the tab break on you). After about 20 iterations, finally happy to release V3 of the Airbox Clip Brace. Instructions Once printed install the clip (either the factory or the printed plastic one if you have lost it) to the brace (either tab or no-tab version depending on your situation) (Optional) Apply epoxy glue or double sided 3M tape to the base. Install over existing bracket and enjoy. Notes: Tolerances are tight in order to have a secure fitment. Some post-processing (i.e. filing/sanding to clean up supports may be required). FAQs What if my tab is bent (and won't hold clips) but not actually broken? Use the No-Tab version of Brace V3. What if my tab has broken off completely? Use the Tab version Brace V3. Will this work on my GS-F? No. It is incompatible (at least the clip as far as I know. Please do feel free to try it). Will this work on my RC-F? Maybe. It looks the same, but feel free to try and let me know how you go. I don't have a 3D printer but would still like replacement clips Happy to help out, just send me a message. Thanks If you do find this model useful or have managed to save money using this model, please consider a small donation which i'll use to fund development of new models. Thanks Version 3.1 Added two versions of the brace. PROD_Airbox_Brace_V3_FactoryOrPartialTab (use if you have an unbroken