Loading…
Description
12x are required per vehicle, 6x per sunroof. A 0.2mm nozzle is required to print due to the tolerances required. I printed this in PETG and have not had an issue with it, ABS/Nylon/PLA may also be acceptable. Due to the rails being aluminum and unobtainium, would not recommend using CF or other reinforced filaments.
Advertisement — Non-personalized
Indexed from Printables
Land Rover Discovery 2 Sunroof Rail Spacers
by Indexed from PRINTABLES
0.00 views0 downloads2026-09-10
12x are required per vehicle, 6x per sunroof. A 0.2mm nozzle is required to print due to the tolerances required. I printed this in PETG and have
License
CC BY-NC 4.0
