Description

I've used this mount in my Defender 90 for a good while now and I'm very happy with it. It's printed in PETG using 0,20mm QUALITY layer height.  You will need M2.5 countersunk machine screws in 12 mm and 6 mm lengths. The short screws (2 × 6 mm) are used to lock the sliders that define the width. The overall thickness is configured by selecting either 9 mm or 12 mm “SideTop” parts. For finer adjustment, use the “shim_xx” parts, which are placed between the components to achieve the desired thickness. Hope you like it!