Description

Print in TPU or some PP, i printed these in generic black TPU . Funny enough as its not a complicated form i tried printing the TPU i have with 0.2mm layer and 0.4mm nozzle on my Ender 3V3 XZ with a printing profile for PETG, and i can say it worked better than the original TPU profile i had installed . Used 6 perimeters and 80% rectilinear infill.The part is already mounted and functional. Needs a lick of grease on the OD , the TPU is creating a bit of friction with the steel bed of the hinge due to the weight of the bonnet itself.  I know its something that costs 1-2€ , but when you have all the necessary things to DIY-it i personally prefer it that way.