Description

Fix for Škoda Rear Trunk Cover Noise On many new Škoda models, the rear trunk cover makes rattling noises when driving over bumps. This is caused by excessive tolerance on the two tenons. An official Škoda dealership "fixed" it by wrapping electrical tape around the tenons, but of course, the tape eventually peeled off. This 3D-printed sleeve is a proper solution. It slips over the tenon to tighten the fit and eliminate the noise. Printed in PLA with the smallest layer height (you can use taller layers to speed up the print if needed). For best results: use a scarf joint and aligned seam position. If the seam is still noticeable, a bit of sanding will clean it up.