Description

Inspired by the @chrisbe_318743 cubby box insert. New model which is stronger, easier to print and suits the kind of storage I require for this area. Requires a print bed at least 190mm x 160mm to print upright with bottom of tray on baseplate of printer.  Supports required to print the four tabs, I used normal grid 30% density 50 degree overhang. Shown printed in Overture PLA Professional Army Green, wall line count = 4 means solid walls, 30% grid infill. Multiple STL files with different divider configurations. Update: “Taller Sides” file runs side walls up to top of tabs and has better filleting around tabs, I had a tab fail on a PETG version so tweaked to make the tabs a bit stronger.  Had previously been using a PLA version for many months without issue, so might have just had the infill settings wrong.