Description

The INEOS Grenadier lacks a good sunglasses holder.  This attaches to the overhead console in the unused portion. This is the Low-Pro version with gives less space, but allows you to see the buttons infront of it. It also has space and some attachment points for a garage door opener. There are three main file groups. There is the plain box version that can be used as a base to be used for other purposes. The main body of the sunglasses holder Two versions of the door.  One is just a plain door (BARE).  The other door is three parts that are the door itself, the red “A” (really upside-down V), and the rest of the ‘GREN DIER” text. The door names ending LOGO, GRENDIER, and ”A” are the fancy door. All the parts are pretty big and I used an XL to print it.  I used PETG CF filled for a matte appearance.  The Letters I printed in regular PETG. An M3 screw and nut hold the door in place.  There is place for 2 magnets each (4total) in the door and case to help it lock up.  This is meant to bolt over the current console.  So remove the four screws and then use the longer M4x20 coarse thread. (These screws are not ‘right’ but they are close.  I do worry that a lot of screwing and unscrewing might hurt the plastic in the holes, but I don’t know) NEEDED: 1 M3 screw and nut 4 magnets round 8mm x 3mm thick Flocking/cloth to line glasses holder area to prevent scratching. M4x20mm coarse thread screws -McMaster:Carr    https://www.mcmaster.com/99461A971   PRINTING  I added supports on the base where the screws heads are.  Standard XL PETG CF profile.  0.2 layer height For the LOGO door, I just open all three files in Prusaslicer and treat them as one object.  The small ‘pins’ are for registration, and I just remove them with a negative space modifier.   Assembly:  Attach the door with M3 screw and bolt.  I used a bit of hot glue to freeze the nut.  Hole for magnets might need cleanin