Description

Center console additional phone holder and other things. Keep in mind that it must be mounted with two M4 x 20mm bolts on the original console. If one day you decide not to use it, the mounted console can be covered with the "cover". Installation: Step 1 - Dismantle the original cup holder by unscrewing the two screws under the rubber pad and pulling it up. It is on clips (photo 3) Step 2 - The base must be mounted using the template to center it (photo 6 and 7). It is good to put something thin and soft like EVA foam between the base and the console so as not to scratch the console (photo 5). Step 3 - Screw in the two M4 x 20mm bolts. It is good that the nuts have a nylon lock (photo 8 and 9). Step 4 - Mount the original cup holder back. On this particular model, the two holes are 72mm in diameter and the phone stand is for the Xiaomi 12T. I have also uploaded the Fusion 360 drawing file so that everyone can modify it for their own needs. The trim on main body can be printed in silver to match Ioniq5 design. Also two rings on cup holes can be in silver. All bodies are print oriented. Support is needed for main body and phone stand.