Description

I wanted to add a seamless wireless charger for my Hyundai I10 - so I designed one to replace the center console tray. To install remove the center console by gently prying at the perimeter of the console to release the clips, and then do the same thing (using a plastic prying tool may help) to the gear shifter plastic trim. Once all the clips are free remove the center console, and then remove the 4 screws holding the tray in place. Install printed replacement, and return screws (be careful not to overtighten the screws while installing them - they are self tapping screws into plastic). Then simply install the console with gentle force to relatch all of the clips (route the cable from the wireless charger through the small slit in the printed part). Print in model orientation, with supports from build plate only. Print in ABS (or other heat resistant plastic) as the car can get pretty hot. After printing I added a dBrand sticker I had lying around for asthetics.