Description

A simple tool made to help with removing the ICC HSD connectors, particularly useful when installing a Pulse unit!  Easier way to use this is to clip it in from underneath the connector. It is designed to retain itself on the male end of the the connector while you just lightly squeeze with your thumb so you do not have to try and push while pulling. Super easy to use!  Printing notes: While you probably can print this with PLA and be just fine, I'd HIGHLY recommend printing in PETG to reduce the risk of this snapping while clipping in on. It's not likely by any means, but PETG is just a better suited material for this case. Make sure to print it in the default import orientation( as shown in the second picture with the tab against the print bed). No need for any infill, just print with 2 walls.