Description

L'italiano Fiat / Alfa Romeo OE 51800472 / 50514230- type intake hose / intake pipe for crankcase ventilation. The hose goes between the engine cover and the intake pipe after the air filter housing. The hose is drawn in two different parts, fits on a 220x220mm print bed. In addition, the files include a sleeve to connect them with hose clamps. That OEM part cost 50-100€, this one a little less! If you want to make it from PETG into a pipe, the file called PipeconnectorFIAT is a connector for connecting the pipes together. If you make the tube from PETG, you will need TPU sleeves on both ends to connect the tube with hose clamps. The file called Hoseconnectortotheends is for this purpose. Note! You will need to print two of these. Whether you made it as a tube or a hose, you will need a total of four 32-38mm hose clamps to connect it! Have fun! Files 1 and 2 diameters: outside 32mm, inside 27mm Files 1.1 and 2.1 diameters: outside 35mm, inside 27mm Hose connector 1, middle section outside diameter 33mm Hose connector 1, middle section outside diameter 35mm Car models that the part fits Fiat Linea, Bravo 1.4 T-Jet Fiat Grande Punto 1.4 T-Jet Alfa Romeo Giulietta / MiTo 1.4 T-Jet Specs: Materials: Hose TPU / TPE, connector PETG Infill 100% Supports needed