Description

I made this for our 2014 Ford Escape's coolant reservoir cap. It can be a bit hard to turn and is tucked in a somewhat awkward spot and this tool helps a lot. It should fit many newer Ford models. I think it may also fit some Mazda, Volvo, Land Rover as I saw a tools for sale online that supposedly work on all these brands. I can only confirm it works on my Ford. If you find it works on other vehicles, let me know and I can add that information. It fits easily with just a little tolerance. I added a 3/8" square drive hole on the handle for a socket wrench just in case you need a little extra torque, which I doubt you will. If your cap is just under 60mm in diameter at the outside of the 6 ribs and is ~55 mm diameter at their base, then this should work for you. Print instructions Category: Automotive Print Settings Rafts: No Supports: No Notes: Flip it text side down. I printed mine out of PETG with: .2mm layers 3 perimeters (.4mm nozzle) 6 top and bottom layers 15% rect infill It seems plenty strong enough.