Description

Simple child lock for the seat belt buckle in the car, so that children do not unbuckle themselves! The fuse is slid over the lock before the belt is engaged. This blocks the unbuckling mechanism and can only be pushed through the small opening with a coin or key. Perfect for travel and longer car trips, so nothing happens in the back seat. The security is designed for standard locks with 50x30 mm size. If that does not fit there is also a universal fuse plate (with and without bracket). This is simply placed on top. When not in use, it can be put into the seatbelt buckle with the optional holder (also helps to suppress the beeping when transporting objects on the back seat). If other dimensions are necessary please just let me know. I have tested on various vehicles from VW, BMW, Renault and Opel. Please note when printing: Since it gets very warm in the car in the summer PLA is not necessarily suitable as a material. It is better to use PETG or ASA. No supports are necessary.   CAUTION: When using this unbuckle safety device, there may be a potential hazard in the event of an accident because the child cannot be unbuckled as quickly and easily as usual. Here, everyone must weigh up for themselves whether they want to take this risk and whether the danger of unbuckling the seatbelt themselves (if the child regularly does this unnoticed during the ride) or that of a slower rescue is rated higher. As an intermediate solution, the safety plate can be used, which can also be easily broken off by first responders. In addition, it is always advisable to keep a high-quality belt cutter visible and within easy reach in the vehicle.   -----------------   Einfache Kindersicherung für das Gurtschloss des Sicherheitsgurtes im Auto, damit sich die Kinder nicht selbstständig abschnallen! Die Sicherung wird über das Schloss geschoben, bevor der Gurt eingerastet wird. Dadurch wird der Mechanismus zum Abschnallen blockiert und kann nur mit einer Münze oder einem Schl