Description

When installing a FAAS Titanium lift pump in my 2006-2007 Silverado 2500HD Duramax I noticed the brake line was rubbing the back of the Wehrli bracket.  The factory Green clips that held the brake line on each side of the pump were too long. I made shorter brake clips that can be used with a 9-10mm fender push clip to create clearance, one for the 20mm heads one for the 18mm heads.  When installing the Relay on the firewall, there is an unused threaded stud just under the drivers side hood spring. The long nut I made will pin the relay housing tight against the firewall.  These were made with PETG and 25% infill.