Description

The Audiofrog GB10 is a great tweeter for your Macan (all ICE Macan model years).  Use these adapters to mount a pair of GB10's in your Macan dash.  These should also fit many other recent Porsche models. Print in something that can take the heat.  I use Polymax PC.  Since these are in your dash, PETG is not likely going to be good enough. You'll need to cut out the plastic mount for the factory tweeter (Bose factory tweeter shown in the pictures).  There are connections circled in orange (and probably more) that you'll need to cut/work through in order to remove the plastic. You'll need three of these u-nuts (metal clips), and three of these screws to mount the adapter into the existing dash holes. u-nuts p/n:  999-507-556-01 screws p/n:  999-073-499-01 You'll want to use cables like these to connect the tweeters to the factory harness (BMW E/F type speaker wiring harness adapter): https://www.ebay.com/itm/373858357456 Solder some of these inline while you're at it. (non-polar 50V 4.7uf Audio Grade) https://www.amazon.com/gp/product/B071DR3377/ref=ppx_yo_dt_b_search_asin_title Crimp on some ferrules to make for a better connection to the tweeter.  Do not over tighten the grub screws! Special thanks to @santirx, @teddis, @madelvik, Ge0 (RIP), and @draper over on macanforum.com.  None of this would have been possible without them.