Description

Replace the old telephone bracket with a MagSafe charger. You will need to lift up the centre console at the rear to remove the old phone bracket and install the new one. There are plenty of instructional videos on Youtube for removing the console, but it shouldn't need removing completely. The MagSafe charger should be a tight fit within the bracket and be secure, if not, a drop of adhesive may be required. The plate can be held down with double-sided tape, or I used a couple of small self-tapping screws up from the console through the existing holes left by the old bracket. The MagSafe charger should protrude enough so that a phone with a case and cameras protruding will still lay flush on the charger. Make sure your centre console looks like the photo, I believe there are different variations. Also see my other model for a tray that sits on top when the charger is not in use.