Description

This adapter will give you the possibility to mount any phone mount or GPS using the slot of a OEM vent. The AMPS hole pattern is used by some GPS such as Garmin or Tomtom. Also there are ton of Ram mount adapter. Specs For Spider and GTV For restyled phase 2 or phase 3 only (I didn't tested for phase 1 but the interior look's different) Can be reversed to use with Right hand drive or Left Hand drive version. The system is not destructive, meaning that you can mount this adapter and then reassemble the whole vents if you didn't broke it during the disassembly. There will be no ventilation anymore because this block the air coming through. It's not designed to be unmounted or mounted at every ride to hide the GPS : The assembly is too tight. Angle is designed for the central vents hole but you can fit it on any of them. not a real AMPS pattern since the screw that I use are a bit bigger, but I am pretty sure you can find spacer to resolve the issue. Assembly instructions Vents on the 916 ph2 and ph3 are made with a 2 part assembly. You need to remove the top cover of your vents or the whole assembly at once. To disassemble the 2 parts of the vent properly, there is a little linkage with a sphere to open hidden vents behind the top cover. I didn't broke the sphere and can reassemble my vent, but you need to take car of this part and it's why removing the whole assembly is better. By doing that, you will see the assembly better and not risking damaging this sphere. Then you can remove the top part and replace it by the holder. The assembly is supposed to be tight fit so to not have the holder rotating but it probably depend of your printing settings and materials. You will maybe need a bit of 2 face tape to have a sturdy system. Print and finish tips I personaly love ASA and ABS for car interior parts to not have melted plastic parts with the sun. For this one, I polished with acetone smoothing and painted with a plastic-dip black paint, to get a soft touch finish. Nee