Description

Description This is a Hex pattern vent designed to replace the top part of the OEM vent. Since it does not provide any way to close or open the vents, it's not something that I personaly use and it was more a props to test another designed of mine. Specs For Spider and GTV For restyled phase 2 or phase 3 only (I didn't tested for phase 1 but the interior look's different) The system is not destructive, meaning that you can mount this vent panel and then reassemble the whole vents if you didn't broke it during the disassembly. There is no way to open or close the vents after mounting the part but there are hidden vents behind that you can open or close during the assembly. Assembly instructions Vents on the 916 ph2 and ph3 are made with a 2 part assembly. You need to remove the top cover of your vents or the whole assembly at once. To disassemble the 2 parts of the vent properly, there is a little linkage with a sphere to open hidden vents behind the top cover. I didn't broke the sphere and can reassemble my vent, but you need to take car of this part and it's why removing the whole assembly is better. By doing that, you will see the assembly better and not risking damaging this sphere. Then you can remove the top part and replace it by this model. Print and finish tips I personaly love ASA and ABS for car interior parts to not have melted plastic parts with the sun. For this one, I polished with acetone smoothing and painted with a plastic-dip black paint, to get a soft touch finish.