Description

Inner Diameter: 14mm Compatibility: This fits standard rear sway bars for most Alfa 147, 156, and GT models. Please verify your rear bar diameter with a caliper before printing, as some sport packs or aftermarket bars may use thicker diameters (like 16mm). [ 1 , 2 , 3 ] ⚙ Recommended Print Settings Do not use rigid plastics like PLA, PETG, or ABS, as they will crack under suspension travel. Filament: TPU (95A or 98A hardness) . This matches the stiffness of aftermarket polyurethane bushings. Infill Density: 100% Solid is required to withstand the clamping force and vehicle load. Perimeters: 3 to 4 walls . Use a standard infill pattern at 100% rather than setting perimeters to 999, as the cross-hatch pattern improves overall part strength. Supports: Not required if printed flat on its side profile.