Description

Compatibility Ph3 horizontal or Ph4 vertical oem fiat 500/595 vents. Print Print one with vertical symetry to get the 2nd side. Use ASA or ABS for hot days… For phase 4 only, you will need to apply a scale multiplayer because the oem vents are slighly bigger. You need to add 12mm to the whole part. Assembly To use it : You need to pull the oem vents from your car and disassemble the chrome cover with a knife or a flat screwdiver. Remove the top part of the cover before the bottom. Then remove all the vents flaps and install the printed part.