Description

Add wireless charging to your 4th Gen 4Runner (2003-2009)!  Fully assembled kits and/or printed parts can be purchased on Etsy . There are two options with this design. You can have 1 or 2 chargers in the center console. It is designed such that no reprinting is needed if you would like to add a second charger in the future.  The coin dispenser cannot be mounted in the center console at the same time as using the charging tray. Let's be real though… most people have already lost that thing long ago! Depending on your vehicles trim level, is whether or not there is an option to plug in the charging pad/s inside the center console. My vehicle is the base SR5 so I had to add a USB charger into the center console to remove the need to route the cables outside the console.  The tray is held in place by magnets. This is to ensure the tray does not slide around and to provide the proper 6mm offset from the front so the lid of the center console closes without force or the need to adjust the tray each time.  This design also takes the tissue box holder into account and has the proper clearances if that is being utilized in the center console lid.  The charging area is 177.5mm x 91.7mm . This should be able to accommodate even the largest phones with cases. To maintain clearances with the lid the phone/device should not be thicker than 12.8mm . Thicker devices, like AirPods, will work but may need to use the front charger in a dual charger setup.  Design Goals: No Supports!!! Clean aesthetics Modular design for faster prototyping and future updates No requirement for permanent modifications to the vehicle itself Utilize otherwise dead space Keep a stock look to the vehicle Easily removable/serviceable Bill of Materials: Heat Set Inserts (M3x5x4) ( USA Option ) Single charger qty: 12 Dual charger qty: 24 Heat insert tool (Optional) Kit option (Includes tool and heat inserts) JADJ Wireless Charging Pad Single charger qty: 1 Dual charger qty: 2 8mm