Description

I installed LED bulbs for the interior lights and realized that it was too bright for my liking so I made these diffusers to make them dimmer. Tested on a 2013 Mazda 6 so I'm assuming it'll work on all gen 3 Mazdas but not sure. If you want it brighter/dimmer I would recommend changing the infill percentage. I recommend 30% infill for the front ones as it gives plenty of light while making it have less glare. The rear ones are a solid piece requiring no infill but if you want them to let less through I would recommend scaling up the y access in your slicer. Print settings: Layer height: 0.2mm Infill density: 30%  Infill pattern: Grid Photo of model printed on BambuLab A1 using Creality white PLA.